You are working as a junior drafting assistant at a civil engineering firm. Your supervisor asks you to verify if three specific survey markers lie on a perfectly straight line across a property map. You decide to use a ${}3 \times 3$ determinant to test if the markers' coordinate points are collinear.

When setting up the determinant with the points' x-coordinates in the first column and y-coordinates in the second column, what must be placed in the third column, and what must the final calculated determinant equal to confirm the points are collinear?

A graphic designer is placing three design elements on a coordinate grid. To ensure they are perfectly aligned in a straight line (collinear), the designer uses the ${}3 imes 3$ determinant method. Match each component of the determinant setup and its calculated result with the correct description of its role in this test.

Verifying Sensor Alignment in Aerospace Manufacturing

A land surveyor is using a coordinate system to check if three boundary markers are perfectly aligned. To do this, the surveyor sets up a ${}3 imes 3$ determinant using the points' coordinates and a column of ones. The boundary markers are confirmed to be collinear (lying on the same straight line) if the final value of the calculated determinant is ____.

A civil engineer is using a coordinate grid to verify that three support pillars for a bridge are perfectly aligned in a straight line (collinear). To use the determinant method for this verification, arrange the following procedural steps in the correct order as they should be performed.

A site manager at a construction project is verifying the alignment of three foundation piers located at specific coordinates on a site map. To confirm these piers are collinear using a ${}3 \times 3$ determinant, the manager sets up the matrix with the coordinates in the first two columns and a column of ones in the third. If the resulting determinant is found to be ${}0$, this confirms that the three piers lie on the same straight line.