A facilities manager is using a geoboard to plan a ramp with a slope of 1/2. To correctly model this slope, which movement should be made from the starting peg to the second peg?

A logistics coordinator is using a geoboard to design a small loading ramp with a slope of 1/2. To model this on the board, the coordinator moves the rubber band up 1 unit; they must then move it right ____ units to reach the next peg.

A construction safety officer is using a geoboard to demonstrate the required 1/2 slope for a temporary equipment ramp. Match each component of the geoboard model with its correct description based on the slope formula $m = \frac{\text{rise}}{\text{run}}$.

An office floor planner is using a geoboard to model a small accessibility ramp with a slope of $\frac{1}{2}$. To correctly represent this incline, the planner should move the rubber band up 2 units and right 1 unit from the starting peg.

A warehouse safety officer is using a geoboard to model the incline of a safety ramp with a slope of 1/2. Arrange the steps in the correct order to accurately build this model starting from the first peg.

Modeling a Slope of 1/2 on a Geoboard

Facilities Maintenance: Ramp Slope Mock-up

Documenting the Geoboard Slope Model

A safety inspector is using a geoboard to model the incline of a ramp with a slope of 1/2. After stretching a rubber band up 1 unit (the rise) and right 2 units (the run), which part of the resulting right triangle represents the actual line with the 1/2 slope?

A landscape designer is using a geoboard to model a drainage slope of 1/2. According to the standard procedure for modeling a positive slope, in which area of the board should the designer place the starting peg to ensure there is enough room to complete the 'rise' and 'run' movements?