A technical designer is marking precise coordinates on a linear scale for a construction project. To ensure accuracy, the designer must identify the equivalent mixed number or specific interval for various measurement points. Match each fraction to its corresponding form or location on the scale.

A maintenance technician is recording a pressure variance of $-\frac{5}{2}$ units on a linear gauge where `${}0$ represents the optimal setting. According to the standard procedure for locating this value, between which two integer marks should the technician place the mark?

A logistics coordinator is marking a pallet weight of $\frac{7}{3}$ tons on a linear scale. True or False: According to the standard procedure for locating values on a number line, this value is correctly placed by converting it to the mixed number ${}2\frac{1}{3}$ and marking it one-third of the distance from the integer mark ${}2$ towards the integer mark ${}3$.

An architectural drafter is marking a point at position $-\frac{1}{4}$ on a site plan's linear scale. To locate this value accurately, the drafter identifies that it lies on the number line between the integer mark 0 and the integer mark ____.

A quality control technician is marking specific measurement points on a linear scale. According to the standard procedure for locating integers, proper fractions, and improper fractions on a number line, arrange the following steps in the correct chronological order.

Calibration Offset on a Linear Scale

Linear Guide Rail Calibration Standard